Baumfolder Wetscore Bedienungsanleitung PDF herunterladen (Seite 12)

TP10320A PAGE 12

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE WHAT TO DO

Poor or no flow from needles Sensor LED is lit when holding

your hand under it:

1. No water in the bottle Fill bottle with solution

2. Excessive air in the tubing Bleed air from tubing

3. Tip of the needle is excessively Replace

worn

4. Control valve is closed Open

5. Needle is not in contact with Adjust

the sheet

6. Solids trapped in needles Remove the needles from the nozzles

and blow out the needles with an air

compressor

Sensor LED not lit when holding

your hand under it:

1. WetScore unplugged Plug in outlet

2. Malfunction in Modulated Amp. Contact your dealer Rep.

Solution leaks at needle/nozzle

connection

1. Needle is cracked Replace

2. Needle is not securely Tighten

fastened to nozzle

Sheet is excessively wet,

score not a fine line

1. Flow rate is to great Adjust control valve for

proper flow

2. Needle is to large for light Change to smaller guage needle

weight sheet

3. To much water in solution Remix solution using

greater amount of alcohol

4. Coating of sheet is to great Recommend use of mechanical scoring

for WetScore use

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Baumfolder Wetscore Bedienungsanleitung Seite 12