Baumfolder Wetscore Bedienungsanleitung PDF herunterladen (Seite 13)

PAGE 13 TP10320A

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE WHAT TO DO

Build up of fluid upon

1. Improper setting of nozzle Readjust nozzle between register

within nozzle holder tape drive roller and register table

Inconsistent Folds

1. Positioning of WetScore Readjust to proper position

needles is out of register

2. Poor or no flow from See above

needles

3. Folder plate stop set off of Readjust to proper position

proper position

4. Alignment ofWetScore needle to Realign the WetScore needle to the

mechanical score is improper mechanical score

Ink is offseting along the

folded edge

1. Sheet coating is to dense for Use of WetScore is not recommended

absorbtion of alcohol solution,

alcohol is breaking down the ink

Solution leaks from control

valve port

1. PVC tubing hardened Replace, see instructions

and brittle

2. Control valve has Replace

cracked

Needles do not shut off

1. Sensor is set to low Adjust sensor so that the LED light is

off when sheet is absent

Discoloration of signatures

along scored edge

1. Paper stock is highly alkaline Reduce the amount of alcohol in

(acid free paper) solution to approx. 30%

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Baumfolder Wetscore Bedienungsanleitung Seite 13